|
|
Free Open Book
Upgrading and Repairing PCs |
|
CMOS Setting SpecificationsThe CMOS RAM must be configured with information about your system's drives and user-selected options before you can use your computer. The Setup program provided with your system is used to select the options you want to use to start your computer. Running or Accessing the CMOS Setup ProgramIf you want to run the BIOS Setup program, you usually have to reboot and press a particular key or key combination during the POST. The major vendors have standardized the following keystrokes to enter the BIOS Setup in recent systems:
If your system will not respond to one of these common keystroke settings, you might have to contact the manufacturer or read the system documentation to find the correct keystrokes. Some unique ones are as follows:
After you are at the BIOS Setup main screen, you'll usually find a main menu allowing access to other menus and submenus of different sections or screens. Using the Intel D845PEBT2 D845PEBT2 motherboard as an example (one of Intel's recent motherboards), let's go through all the menus and submenus of this typical motherboard. Although other motherboards might feature slightly different settings, most are very similar. BIOS Setup MenusMost modern BIOSs offer a menu bar at the top of the screen when you're in the BIOS Setup that controls navigation through the various primary menus. A typical menu bar offers the choices shown in Table 5.8.
Choosing each of these selections takes you to another menu with more choices. The following sections examine all the choices available in a typical motherboard, such as the Intel D845PEBT2. Maintenance MenuThe Maintenance menu is a special menu for setting the processor speed and clearing the setup passwords. Older motherboards used jumpers to configure the processor bus speed (motherboard speed) and processor multiplier. Most newer boards from Intel and others now offer this control via the BIOS Setup rather than moving jumpers. In the case of Intel, one jumper still remains on the board called the configuration jumper, and it must be set to Configure mode for the Maintenance menu to be available. Setup displays this menu only if the system is set in Configure mode. To set Configure mode, power off the system and move the configuration jumper on the motherboard from Normal to Configure (see Figure 5.6, earlier in this chapter). Because this is the only jumper on a modern Intel board, it is pretty easy to find. When the system is powered back on, the BIOS Setup automatically runs, and you will be able to select the Maintenance menu shown in Table 5.9. After making changes and saving, power off the system and reset the jumper to Normal mode for normal operation.
Note that most newer Intel processors are designed to allow operation only at or below their rated speeds (a feature called speed locking), whereas others allow higher-than-rated speeds to be selected. If a user forgets his password, all he has to do is set the configuration jumper, enter the Maintenance menu in BIOS Setup, and use the option provided to clear the password. This function doesn't tell the user what the password was; it simply clears it, allowing a new one to be set if desired. This means the security is only as good as the lock on the system case because anybody who can get to the configuration jumper can clear the password and access the system. This is why most better cases come equipped with locks. Extended Configuration SubmenuThe Extended Configuration submenu on some Intel motherboards has memory setup options similar to those found in the section "Additional Advanced Features," later in this chapter. See this section for details. Main MenuThe standard CMOS Setup menu dates back to the 286 days, when the complete BIOS Setup consisted of only one menu. In the standard menu, you can set the system clock and record hard disk and floppy drive parameters and the basic video type. Newer BIOSs have more complicated setups with more menus and submenus, so the main menu often is fairly sparse compared to older systems. The main menu in a modern system reports system information such as the BIOS version, the processor type and speed, the amount of memory, and whether the memory or cache is configured for ECC functionality. The main menu also can be used to set the system date and time. Table 5.10 shows a typical main menu.
Some motherboards might also offer the options shown in Table 5.11.
ECC stands for error correcting code, which is the use of extra bits on the memory modules to detect and even correct memory errors on-the-fly. For ECC to be enabled, more expensive ECC DIMMs would have to be installed in the system. Note that all DIMMs would need to be ECC versions for this to work; if even one is non-ECC, ECC can't be enabled. I highly recommend purchasing ECC memory and enabling this function because it makes the system much more fault tolerant and prevents corrupted data due to soft errors in memory. Random memory errors can occur at the rate of up to 1 bit error per month for every 64–256 megabytes installed. ECC ensures that these errors don't creep into your data files, corrupt the system, or cause it to crash.
See "Error Correcting Code," p. 470. Be sure to check whether your motherboard supports ECC memory before purchasing memory. You can install ECC memory in a non-ECC-capable board, but the ECC functions will not work. Also make sure you are aware of the memory requirements for your board. Don't try to install more memory than the board supports, and be sure the modules you use meet the specifications required by the board. See the documentation for the motherboard for more information on the type and amount of memory that can be installed. Most older BIOSs report memory as base and extended memory instead of as a single value. Base memory is typically 640KB and sometimes is called conventional memory. Extended memory is that which is beyond the first megabyte in the system. You can't change any values in the memory fields; they are only for your information because they are automatically counted up by the system. If the memory count doesn't match what you have installed, a problem has likely occurred with some of the memory: It is defective, is not fully seated or properly installed, or is a type that is incompatible with your system. Advanced MenuThe Advanced menu is for setting advanced features that are available through the motherboard chipset. This part of your BIOS setup is specific to the particular chipset the motherboard uses. Many chipsets are available on the market today, and each has unique features. The chipset setup is designed to enable the user to customize these features and control some of the chipset settings. Right now, one of the most popular chipsets is the Intel 845PE chipset. Table 5.12 shows the typical BIOS chipset settings for a board with a 845PE chipset. PCI Configuration SubmenuThe PCI Configuration submenu is used to select the IRQ priority of add-on cards plugged into the PCI slots. Auto (the default) should be used to allow the BIOS and operating system to assign IRQs to each slot unless specific PCI cards require unique IRQs. See Table 5.13 for a typical example.
Additional IRQs might be available if onboard devices such as the serial and parallel ports are disabled. Boot Configuration SubmenuThe options in Table 5.14 configure the system's PnP and keyboard configuration during initial boot. Additional Advanced FeaturesMany boards differ in the advanced chipset menus. In most cases, unless you know exactly which chipset and what type of memory and other items are found in your system, it is best to leave these settings on Auto. In that case, the modern boards use the configuration ROM found on the DIMM or RIMM memory modules to properly configure the memory settings. In fact, many newer boards no longer allow these settings to be manually adjusted because, in most cases, all that does is lead to trouble in the form of an unstable or a failing system. If you do want to play with these settings, I recommend first finding out exactly which memory modules and chipset you have and contacting the manufacturers of them to get their databooks. The databooks have all the technical information related to those devices. Table 5.15 lists settings used by a typical motherboard's Chipset Configuration submenu.
Some motherboards might also have advanced chipset options similar to those described in Table 5.16. Peripheral ConfigurationThe Peripheral Configuration menu is used to configure the devices built into the motherboard, such as serial ports, parallel ports, and built-in audio and USB ports. Table 5.17 shows a typical Peripheral Configuration menu and choices. I recommend disabling serial and parallel ports if they are not being used because this frees up those resources (especially interrupts that are in high demand) for other devices. IDE Configuration SubmenuThe IDE Configuration submenu is for configuring IDE devices, such as hard drives, CD-ROM drives, LS-120 (SuperDisk) drives, tape drives, and so on. Table 5.18 shows the IDE Configuration menu and options for a typical modern motherboard. The hard disk pre-delay function is to delay accessing drives that are slow to spin up. Some drives aren't ready when the system begins to look for them during boot, causing the system to display Fixed Disk Failure messages and fail to boot. Setting this delay allows time for the drive to become ready before continuing the boot. Of course, this slows down the boot process, so if your drives don't need this delay, it should be disabled. IDE Configuration SubmenusThese submenus are for configuring each IDE device, including primary and secondary masters and slaves. Of all the BIOS Setup menus, the hard disk settings are by far the most important. In fact, they are the most important of all the BIOS settings. Most modern motherboards incorporate two IDE controllers that support up to four drives. Most modern BIOSs have an autodetect feature that enables automatic configuration of the drives. If this is available, in most cases you should use it because it will prevent confusion in the future. With the Auto setting, the BIOS sends a special Identify Drive command to the drive, which responds with information about the correct settings. From this, the BIOS can automatically detect the specifications and optimal operating mode of almost all IDE hard drives. When you select Auto for a hard drive, the BIOS redetects the drive specifications during POST, every time the system boots. You could swap drives with the power off, and the system would automatically detect the new drive the next time it was turned on. In addition to the Auto setting, most older BIOSs offered a standard table of up to 47 drive types with specifically prerecorded parameters. Each defined drive type has a specified number of cylinders, number of heads, write precompensation factor, landing zone, and number of sectors. This often was used many years ago, but it is rarely used today because virtually no drives conform to the parameters on these drive type lists. Another option is to select a setting called User or User Defined, which is where you can enter the specific drive CHS (Cylinder, Head, and Sector) parameters into the proper fields. These parameters are saved in the CMOS RAM and reloaded every time the system is powered up. Most BIOSs today offer control over the drive translation settings if the type is set to User and not Auto. Usually, two translation settings are available, called Standard and LBA. Standard or LBA-disabled is used only for drives of 528MB or less, where the maximum number of cylinders, heads, and sectors are 1,024, 16, and 63, respectively. Because most drives today are larger, this setting is rarely used. LBA (logical block addressing) is used for virtually all drives that are larger than 528MB. Note that systems dating from 1997 and earlier usually are limited to a maximum drive size of 8.4GB unless they have a BIOS upgrade. Systems from 1998 and later usually support drives up to 136.9GB; systems dating from 2002 and beyond usually support drives beyond 137GB, although a BIOS upgrade might be necessary. During drive accesses, the IDE controller transforms the data address described by sector, head, and cylinder number into a physical block address, significantly improving data transfer rates. Table 5.19 shows the IDE drive settings found in a typical modern motherboard BIOS.
Setting the drive type to Auto causes the other values to be automatically configured correctly. I recommend this for virtually all standard system configurations. When set to Auto, the BIOS sends an Identify command to the drive, causing it to report back all the options and features found on that drive. Using this information, the BIOS then automatically configures all the settings on this menu for maximum performance with that drive, including selecting the fastest possible transfer modes and other features. For hard drives, the only option available other than Auto is User. When set to User, the other choices are made available and are not automatically set. This can be useful for somebody who wants to "play" with these settings, but in most cases, all you will get by doing so is lower performance and possibly even trouble in the form of corrupted data or a nonfunctional drive. User should be used only if a drive was originally prepared with a set of values different from those recognized automatically with the default Auto configuration setting. Diskette Configuration SubmenuThe Diskette Configuration submenu is for configuring the floppy drive and interface. Table 5.20 shows the options in a typical BIOS Setup.
By enabling the write-protect feature, you can disallow writing to floppy disks. This can help prevent the theft of data as well as help to prevent infecting disks with viruses should they be on the system. Event LoggingThe Event Logging menu is for configuring the System Management (SMBIOS) event logging features. SMBIOS is a DMI-compliant method for managing computers on a managed network. DMI stands for Desktop Management Interface, a special protocol that software can use to communicate with the motherboard. Using SMBIOS, a system administrator can remotely obtain information about a system. Applications such as the LANDesk Client Manager (originally developed by Intel but now sold by LANDesk Software) can use SMBIOS to report the following DMI information:
Table 5.21 shows a typical Event Logging menu in BIOS Setup.
Some motherboards with ECC memory also support log ECC events. I find event logging particularly useful for tracking errors such as ECC errors. Using the View Log feature, you can see whether any errors have been detected (and corrected) by the system. Video ConfigurationThe Video Configuration menu is for configuring video features. Table 5.22 shows the functions of this menu in a typical modern motherboard BIOS.
Other motherboards might also include features such as those shown in Table 5.23.
The most common use of this menu is to change the primary video device. This is useful under Windows 98 and later versions, which support dual-monitor configurations. Using this feature, you can set either the AGP or PCI video card to be the primary boot device. USB Configuration SubmenuThe USB Configuration submenu is used for configuring the USB ports on the system. Table 5.24 shows the functions of this menu in a typical modern motherboard BIOS.
Some motherboards that have separate USB 1.1 and USB 2.0 ports might offer additional configuration options. Legacy USB support means support for USB keyboards and mice. If you are using USB keyboards and mice, you will find that the keyboard is not functional until a USB-aware operating system is loaded. This can be a problem when running DOS; diagnostics software; or other applications that run outside of USB-aware operating systems, such as Windows 98, Windows Me, Windows XP, and Windows 2000. In that case, you should enable the USB legacy support via this menu. Even with legacy support disabled, the system still recognizes a USB keyboard and enables it to work during the POST and BIOS Setup. If USB legacy support is disabled (the default on some systems), the system operates as follows:
To install an operating system that supports USB, enable USB legacy support in BIOS Setup and follow the operating system's installation instructions. After the operating system is installed and the USB drivers are configured, USB legacy support is no longer used and the operating system USB drivers take over. However, I recommend that you leave legacy support enabled so the USB keyboard functions in DOS while running self-booting or DOS-based diagnostics or when running other non-USB-aware operating systems. If USB legacy support is enabled, you shouldn't mix USB and PS/2 port keyboards and mice. For example, don't use a PS/2 keyboard with a USB mouse or a USB keyboard and a PS/2 mouse. Also remember that this legacy support is for keyboards and mice only; it won't work for USB hubs or other USB devices. For devices other than keyboards or mice to work, you need a USB-aware operating system with the appropriate USB drivers. Fan Control Configuration SubmenuMost systems have one or more chassis fans to help cool the system. Table 5.25 shows the function of the Fan Control Configuration submenu on a typical high-performance PC.
Resource Configuration/PnP Configuration MenuIf you have a motherboard with one or more ISA slots, you need to use the Resource Configuration or PnP Configuration menu to determine which IRQs and memory addresses are available for ISA devices. This is not necessary on motherboards that have only PCI or PCI and AGP slots. For more information about this menu, see Upgrading and Repairing PCs, 12th Edition, included in electronic form on the DVD packaged with this book. Security MenuMost BIOSs include two passwords for security, called the supervisor and user passwords. These passwords help control who is allowed to access the BIOS Setup program and who is allowed to boot the computer. The supervisor password is also called a setup password because it controls access to the setup program. The user password is also called a system password because it controls access to the entire system. If a supervisor password is set, a password prompt is displayed when an attempt is made to enter the BIOS Setup menus. When entered correctly, the supervisor password gives unrestricted access to view and change all the Setup options in the Setup program. If the supervisor password is not entered or is entered incorrectly, access to view and change Setup options in the Setup program is restricted. If the user password is set, the password prompt is displayed before the computer boots up. The password must be entered correctly before the system is allowed to boot. Note that if only the supervisor password is set, the computer boots without asking for a password because the supervisor password controls access only to the BIOS Setup menus. If both passwords are set, the password prompt is displayed at boot time, and either the user or the supervisor password can be entered to boot the computer. In most systems, the password can be up to seven or eight characters long. If you forget the password, most systems have a jumper on the board that allows all passwords to be cleared. This means that for most systems, the password security also requires that the system case be locked to prevent users from opening the cover and accessing the password-clear jumper. This jumper is often not labeled on the board for security reasons, but it can be found in the motherboard or system documentation. Provided you know the password and can get into the BIOS Setup, a password can also be cleared by entering the BIOS Setup and selecting the Clear Password function. If no Clear function is available, you can still clear the password by selecting the Set Password function and pressing Enter (for no password) at the prompts. Table 5.26 shows the security functions in a typical BIOS Setup. To clear passwords if the password is forgotten, most motherboards have a password-clear jumper or switch. Intel motherboards require that you set the configuration jumper, enter the Maintenance menu in BIOS Setup, and select the Clear Password feature. If you can't find the documentation for your board and aren't sure how to clear the passwords, you can try removing the battery for 15 minutes or so—it clears the CMOS RAM. It can take that long for the CMOS RAM to clear on some systems because they have capacitors in the circuit that retain a charge. Note that this also erases all other BIOS settings, including the hard disk settings, so they should be recorded beforehand. Power MenuPower management is defined as the capability of the system to automatically enter power-conserving modes during periods of inactivity. Two main classes of power management exist; the original standard was called Advanced Power Management (APM) and was supported by most systems since the 386 and 486 processors. More recently, a new type of power management called Advanced Configuration and Power Interface (ACPI) has been developed and began appearing in systems during 1998. Most systems sold in 1998 or later support the more advanced ACPI type of power management. In APM, the hardware does the actual power management, and the operating system or other software had little control. With ACPI, the power management is now done by the operating system and BIOS, and not the hardware. This makes the control more centralized and easier to access and enables applications to work with the power management. Instead of using the BIOS Setup options, you merely ensure that ACPI is enabled in the BIOS Setup and then manage all the power settings through Windows 98/Me, 2000/XP, or later. Tables 5.27 and 5.28 show the typical power settings found in a managed system.
When in Standby mode, the BIOS reduces power consumption by spinning down hard drives and reducing power to or turning off monitors that comply with Video Electronics Standards Organization (VESA) and Display Power Management Signaling (DPMS). While in Standby mode, the system can still respond to external interrupts, such as those from keyboards, mice, fax/modems, or network adapters. For example, any keyboard or mouse activity brings the system out of Standby mode and immediately restores power to the monitor. In most systems, the operating system takes over most of the power management settings, and in some cases, it can even override the BIOS settings. This is definitely true if the operating system and motherboard both support ACPI. Some systems feature additional power management settings in their BIOS. These options are listed in "Additional Power Management Settings" in the Technical Reference section of the DVD packaged with this book. Boot Menu (Boot Sequence, Order)The Boot menu is used for setting the boot features and the boot sequence (through submenus). If your operating system includes a bootable CD—Windows XP, for example—use this menu to change the boot drive order to check your CD before your hard drive. Table 5.29 shows the functions and settings available on a typical motherboard. Using this menu, you can configure which devices your system boots from and in which order the devices are sequenced. From this menu, you also can access Hard Drive and Removable Devices submenus, which enable you to configure the ordering of these devices in the boot sequence. For example, you can set hard drives to be the first boot choice, and then in the hard drive submenu, decide to boot from the secondary drive first and the primary drive second. Normally, the default with two drives would be the other way around. Some recent systems also enable you to boot from external USB drives, such as Zip or LS-120 SuperDisk drives. Boot Device Priority SubmenuThis submenu is used to select the order in which boot devices will be read to start the system. Table 5.30 shows the options found on a typical motherboard.
The Hard Disk Drives submenu (not shown) for the D845PEBT2 motherboard lists up to 12 hard disks, enabling you to choose the preferred boot device; older systems usually list only primary and secondary master and slave (four) drives. This BIOS option enables you to install more than 1 bootable hard disk in your computer and select which one you want to boot from at a BIOS level, rather than by using a boot manager program. If you need to work with multiple operating systems, this menu can be very useful. The Removable Devices and ATAPI CD-ROM Drives submenus (not shown) list up to four devices of each type, enabling you to select from which removable device or ATAPI drive to boot. On older systems, these options might be included in the boot sequence menu. Some motherboards also list Zip and SCSI drives as bootable drives. Exit MenuThe Exit menu is for exiting the Setup program, saving changes, and loading and saving defaults. Table 5.31 shows the typical selections found in most motherboard BIOSs.
After you have selected an optimum set of BIOS Setup settings, you can save them using the Save Custom Defaults option. This enables you to quickly restore your settings if they are corrupted or lost. All BIOS settings are stored in the CMOS RAM memory, which is powered by a battery attached to the motherboard. Additional BIOS Setup FeaturesSome systems have additional features in their BIOS Setup screens, which might not be found in all BIOS. Some of the more common features you might see are listed in Table 5.32. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
