SOHO Network Topologies / Upgrading and Repairing Networks

In Figure E.1 you can see two types of SOHO networks, each of which is connected to the Internet.

In some cases you might not want to connect your SOHO network to the Internet. Instead, you might choose to use a separate computer for that connection (if it is required) and use it for general emails to company contacts. This approach will suffice to provide customers with an Internet presence, but will lack the capability to coordinate external contacts with internal network capabilities, such as fulfilling an order and billing the customer. As an alternative, you can also use MAC address filtering or other methods to enable certain network computers to communicate with each other but not with the Internet.

As you can see, there is a lot to be gained from connecting at least part of your SOHO network to the Internet. Using a firewall will usually suffice, but again, an inexpensive firewall is not as good as an enterprise firewall. So if you want to expose part of your network, protect it with several firewalls.

Note

You can find out more about firewalls in Chapter 45, "Firewalls." There are many types of firewall technology, and you should understand them before trusting your small business with a hardware or software firewall product.

A third topology uses wireless connectivity instead of copper cables. If you operate your business from home and don't want to go punching holes in the wall and spending endless time stringing network cables from one room to another, then wireless may be a great solution for your business. Unless you have no need for an Internet connection, the only cable in a wireless network that you'll need is one to connect the Access Point to your Internet connection (such as a cable or DSL modem). Even if all the computers in your SOHO are located in the same room, wireless may be a good choice if you don't want to go tripping over cables running here and there.

A fourth topology mixes wired and wireless clients connected to each other and to the Internet by a wireless router with an integrated Ethernet switch. You can use either type of connection for any station on the network.

The installer of the cable/DSL modem should configure it and your main computer to work well. After that you will have to move the connection from that computer and attach it to the Access Point.

Caution

Some cable/DSL modems come with an RJ-45 receptacle, and this is usually the case with an Access Point (as well as other cable/DSL routers). Some cable/DSL modems come with a USB connection. In that case, connecting it to a single computer is easy. Finding an Access Point or router that can connect to a USB port can be difficult and, as they come to market, expensive. Be sure to check with your ISPfind out what kind of termination will be done on your premises. If possible, request an RJ-45 jack/receptacle.

Another way around this is to connect the cable/DSL modem directly to a computer, such as Windows XP or Windows Server, and use the routing and Internet sharing capabilities of these operating systems. If you use this method, the computer with the Internet connection must be turned on at all times to permit other stations to connect with the Internet. This method is known as Internet Connection Sharing (ICS). The rise of low-cost routers and access points has largely replaced ICS and other connection-sharing programs.

To configure an access point, most DSL or cable modems enable you to connect an RJ-45 terminated network cable to your PC and/or Access Point. From there you can use a browser (the URL for the DSL or cable modem's built-in web server is given in the hardware's installation manual) and then configure such things as an ID that the Access Point and computers that access it will use. Another thing you can configure here is security using encryption. This can keep others from intercepting your network communications. Use this feature to lessen the chance that someone can listen in on your network traffic . After it's configured, disconnect the cable and hook up the access point to your cable/DSL modem (or a router port connected to the modem).

Installing a wireless adapter is as easy as installing a regular network adapter, particularly if you use USB adapters. Install the driver disk; then, plug the adapter into a USB port (preferably USB 2.0) and configure your connection as soon as the device is recognized.

Tip

Another thing to consider when incorporating wireless networking is that most wireless access points for the SOHO market include a 10/100 Ethernet switch with four or more RJ-45 ports. This means you can use standard network adapters for some computers and connect them to the AP, while using wireless adapters for others. This is a great solution if you have servers or client computers that generally stay in the same place (use a wired connection), while other computers (such as laptops) can be moved around and use the wireless connection.

Using wireless in any kind of office offers you mobility when using a laptop computer. It offers easy relocation should you decide to move a computer from one place to another. And the price is now down so low that wireless (IEEE 802.11g) equipment is very inexpensive. The major trade-off is 54Mbps (maximum rate) versus 100Mbps with typical network adapters and cables.

Upgrading and Repairing Networks

SOHO Network Topologies

Figure E.1. There are several topologies for creating a SOHO network.

Figure E.2. Using a wireless network in the SOHO environment.