PC Overclocking, Optimization, and Tuning - 2th Edition

Custom Setup Mode

If MemMaker has encountered any errors caused by a specific device driver or by any program, reboot the computer and select the Custom Setup mode. Then, select the Yes option when prompted to answer the question Specify which drivers and TSRs to include in optimization?

The Custom Setup mode looks very similar to Express Setup. The difference is that after the question about EMS memory is displayed, an Advanced Options dialog appears. The options specified in this dialog determine the manner in which MemMaker will configure the memory during the optimization process.

If necessary, the user can change the options in the Advanced Options dialog. Use the up arrow <↑> and down arrow <↓> keys to select the option you need. To change the values, use the <Space> bar. For information on a particular option press the <F1> key.

Having set all the options, press <Enter> to continue. When necessary, MemMaker will prompt you to specify an option or answer a question. In such a case, you need simply answer correctly and/or follow the instructions. When optimization is completed, MemMaker will prompt you to restart the computer to test the loading order of the device drivers and resident programs.

After this, the process is similar to that in Express Setup.

MemMaker will modify the system configuration, and introduce changes into Config.sys, Autoexec.bat, and sometimes System.ini files. Before modifying the files, MemMaker will create backup copies, usually with the same names but with the .umb filename extension. In case of problems you will be able to use these backup copies to restore the original configuration. You can even undo the changes after you've exited MemMaker. To undo the changes, proceed as follows:

1. Exit all active programs.

2. From the command line, run the following command: Memmaker /undo. A message will appear prompting you to restore original configuration or to exit MemMaker.

3. To restore the original configuration files, press <Enter>. You'll see a message prompting you to restart the computer.

4. Press <Enter>.